Steps To Follow For Installing Cell Phone Signal Boosters

Cellular Signal Booster
Cellular Signal Booster
Cell Phone Signal Boosters
Cell Phone Signal Boosters

A lot of people are now using cell phone signal boosters for avoiding the problems associated with poor cell reception inside their homes, office, and vehicles. These devices are capable of providing better connectivity in areas where there is low signal strength. These devices can also be useful for you if you are suffering from different problems caused by low signal quality including call dropping, poor voice clarity, slow messaging and internet, etc.

Many people seek the help of a technician for installing cell signal boosters. However, these devices are very easy to install and you can install it yourself even if you do not have much technical knowledge. Therefore, we provide the steps you have to follow for installing cell phone signal boosters in your home, office, or vehicle.

Parts Of A Signal Booster

Before installing a cell phone signal boosters, you have to be aware of the different parts they have. The main parts of a booster include:

  • An exterior antenna, that is used for receiving signals from the outside.
  • An amplifier that is responsible for boosting the strength of the incoming signals.
  • An interior antenna that broadcasts the boosted signals to the required areas.
  • And finally, cables to connect.

You have to install these parts separately and connect them using the cables. Even though the installation is a multi-step process, each of these steps is very easy. Therefore, you don’t need much technical expertise to install them.

Installing A Signal Booster In Home/Office:

The following are the steps you have to follow for installing cell signal boosters in your home or office:

Find A Spot That Has Good Signal Strength

The first thing you have to do before installing your signal booster is to find a good spot for installing your exterior antenna. The strength of the signals received by your exterior antenna is the key to getting the maximum performance from your boosters. Hence, find a spot in your office/home that receives maximum outside signals with the help of your mobile phones.

Switching your phone to field test mode will be useful for getting the accurate readings of the signal strength available in different areas. You can also use some mobile applications for this purpose. Don’t always trust the bars, as they may not be accurate all the time.

Install The Exterior Antenna

After finding a good spot, now it is time for you to install the exterior antenna of the booster. The best spot is your roof. However, if this option is not possible for you, then install the antenna on your windows. Try to mount the exterior antenna as high as possible. You can get different types of mounts for holding your antenna including pole mounts, glass mounts, magnetic mounts, wall mounts, etc. They will be useful for you to install the antenna easily in a high location.

When installing the exterior antenna, try to fix it near the edge of the roof. Also, if you are using a uni-directional antenna, it is important for you to point it away from your building.

Install The Amplifier

The amplifier should be installed in a spot where you can easily access it. Also, make sure that the area is well-ventilated.

Install The Interior Antenna

When installing the interior antenna, there are some important things you have to notice. There should be a minimum distance between your exterior and interior antenna. Otherwise, the boosted signals from the interior antenna will reach the exterior antenna thereby resulting in a feedback loop. This situation is known as oscillation, and it can significantly affect the performance of your cellular booster. Hence, to avoid this problem, make sure that there is enough distance between both these antennas.

Connect The Cords

After installing all the components, you can connect them together using the cables.

Connect To The Power Supply

After making sure that all the components are installed properly, you can connect the booster to the power supply and ensure that the booster is working properly. If you need to make any changes, you will have to reboot the booster.

Installing A Signal Booster In A Vehicle

The procedure of installing a signal booster in a vehicle is almost similar to installing it in your home.

Here, you have to mount the exterior antenna on the roof of your vehicle for avoiding oscillation. Then install the amplifier in a location that is convenient for you to access. The next step is to place your interior antenna at the required spot. After this, connect all the components with the help of the cables and finally, connect the booster to the power supply. Your signal booster is ready for use!

Installing the signal booster is an easy procedure that you can do yourself without the help of a technician. The above steps will help you to install this device in your home, office, or vehicle.